TLS
SKU: TLS210NRx1
10,000 lb. Capacity — Flexmetric Standard 3-Piece Arms
A versatile 10,000 lb. two-post lift built around the Flexmetric arm design — three-piece offset front and straight three-piece rear arms for optimal asymmetric and symmetric loading. Premium North American Bucher power unit and field-adjustable install.
- 10,000 lb. Capacity
- 76" Lift Height
- NA Bucher Power Unit
- <75 dB Operation
- Stronger and more stable structure — up to 20% heavier than many competitors. Two Ø 2" / 51 mm reinforcement tubes are welded inside the 11" x 7" / 1/4" wall (279 mm x 178 mm with 6 mm wall) columns to provide better stability with heavier loads.
- Corrosion-resistant protection — steel components are Wheelabrator shot-blasted and acid-washed before a "double bake" powder-coat finish is applied.
- Lifts higher to provide more under-car work area — 70-1/2" / 1,791 mm cylinder stroke provides 76" / 1,930 mm lift without adapters, with a maximum attainable lift height of 87" / 2,210 mm.
- Flexible vehicle loading — Flexmetric arm design uses three-piece offset front and straight three-piece rear lifting arms for optimum asymmetric and symmetric loading.
- Reduced installation costs — field-adjustable height and width easily adapt to most installation dimensions.
- Premium North American components — Bucher 2 HP / 1.5 kW power unit, 3/8" / 9.5 mm equalizing cables, and 2" / 51 mm ID hydraulic cylinders for longer, more dependable service life.
- Reduced vehicle setup time — Acme-screw "drop-in" lift pads have a lowered height of 4" / 102 mm with a rubber pad, extendable by 1-1/2" / 38 mm, 3" / 76 mm, or 6" / 152 mm using nickel-plated drop-in adapters. Power unit can be installed on either column.
- Quieter operation (< 75 dB) — rubber mounting grommets reduce power unit noise.
- Car door protection — 11" x 2" / 279 mm x 51 mm rubber door bumpers mounted on both lifting carriages reduce door damage.
- More models to choose from — standard Flexmetric design with three-piece arms, symmetric version with equal-length straight arms, extended height 172" / 4,389 mm, plus a choice of red or blue.
- Three-piece, offset arms front and rear for asymmetric and symmetric loading
- Height adapters — #TLS2PTA4-2
- Drop-in screw-adjustment lift pads
- 3/8" / 9.5 mm non-fatigue cables with 3-1/2" / 89 mm pulleys
- 2" / 51 mm tube column reinforcement
- Single-point lock release
| Capacity | 10,000 lb. / 4.5 T |
|---|---|
| Overall Height | 138" or 148" / 3,505 mm or 3,759 mm |
| Under-Bar Clearance (Field-Adjustable) | 131" or 141" / 3,327 mm or 3,581 mm |
| Overall Width | 135-1/2" / 3,429 mm |
| Width Between Columns | 112-3/4" / 2,845 mm |
| Drive-Thru Width | 92" / 2,337 mm — symmetric: 100" / 2,540 mm |
| Height to Lowered Lift Pad | 4" / 102 mm |
| Raised Height with Standard Pad | 76" / 1,930 mm |
| Raised Height with Adapters | 87" / 2,210 mm |
| Lifting Time | 55 seconds |
| Front Arm Reach | 19-3/4" to 42" / 502 mm to 1,067 mm — symmetric: 35" to 60" / 889 mm to 1,524 mm |
| Rear Arm Reach | 35" to 60" / 889 mm to 1,524 mm |
| Standard Power Requirements | 230 V — 50/60 Hz — 1 PH — 20 A |
| Shipping Weight | 1,980 lbs. / 900 kg |
| Model TLS210NRx1 | Standard height as listed |
| Model TLS210SRx1 | Height as listed, symmetric, equal arms |